Overwatch

Figma – Genji

The second release in the Figma line for Overwatch was Genji. Tracer being the poster child for Overwatch made sense for release number one, Genji kind of makes sense for release two. He is a pretty bad ass ninja, his robotic design lends itself to being highly articulated, and he looks like a sentai warrior. I don’t really know how popular Overwatch is in Japan, but Figma IS a Japanese toy line, so that audience is sort of the primary audience.

Genji actually is quite a departure from Tracer. I mentioned how his cyborg design works for the articulation, and it definitely shows, he is quite a bit more articulated than Tracer. Almost too articulated if that’s possible (side note, it is, look at any AY Revo). He neck and shoulders in particular have a sort of double ball set up going that let them extend quite a bit. It actually makes his shoulders look odd at times and his neck definitely feels too long if you are looking at it from the wrong angle.

Genji also has a lot more interesting accessories than Tracer. Tracer got a couple of guns and her pulse bomb. Genji has his Dragon Blade, his smaller dagger weapon and a neat effect part of his stars being thrown. There are also scabbards for both blades on his back, though neither actually holds a blade. Instead they each have removable handle bits, for when the blade weapons are being held.

He looks great holding his swords. His articulation allows you to do all sorts of sword wielding poses as well, both single and dual wielding. The ninja star effect part is neat, but the weight and looseness of some of the joints make it tricky to pose at times. Plus it kind of vanishes into the flatness of itself when looked at straight on.

He is quite a bit larger than Tracer as well. The added weight and larger feet allow him to stand pretty well even without his stand, something that’s kind of a problem for Tracer.

Despite his wonky joints, Genji is probably one of the better releases for the Overwatch Figmas so far (as of this post). Aesthetically Widowmaker is a bit nicer but in terms of pose-ability and fun factor, Genji is better than Widowmaker.

Overwatch Ultimates – Reinhardt

May 15th, 2019

by Ramen Junkie.

No comments yet

While I really prefer the Figma Overwatch figures to the Hasbro Ultimates versions, I have very little hope that Figma will every put out any of the larger Tank heroes. This is the one place where Hasbro definitely has the advantage. A standard sized Figma is anywhere from $50-$70+, a Figma the size of any of the tanks would easily run $150-$200, versus Hasbro’s $50. The first of the larger figures put out by Hasbro is Reinhardt, in his standard look. I believe Reinhardt has a slightly more limited release versus the single packed figures. I imagine part of this is his price and his size.

I was a little worried about the idea of this figure. There are a lot of elements here that could easily go wrong. He has slightly swirly” plastic, he is bulky which could hinder articulation, he could feel too large or too small, that sort of thing. The articulation was the biggest worry. Larger figures tend to have issues with articulation, especially from Hasbro, and armored figures in general tend to be super limited by armor bits. Reinhardt, fortunately, manages to avoid this problem for the most part. He isn’t “Spider-Man” articulated, but he is pretty pose-able. The bulk gets in the way of everything way less than expected.

He also scales very well next to both the other Hasbro figures and the Figmas. He has a lot of nice heft to him and feels solid all around. There are also a lot fo nice details on every part of him, I particularly like his hammer. The hammer works well, he can carry it in one or two hands and pose to look like he is swinging it.

He also has a shield accessory part. The lion crest on his arm pops off and the shield can be placed between the arm and crest. It has a couple of pieces that let it stand on the ground independently but Rein can also carry it around. The shield is pretty neat, but I have a few complaints with it. It feels a little too opaque. Part of this is the plastic needed to make it durable I’m sure, since transparent plastic tends to be much more brittle. A second complaint. The lion crest tends to fall off his arm. The armor sculpt gets int he way of fitting it on snugly, so it just, doesn’t fit very securely without the shield.

My other nitpick with this figure, especially for the price, he really should have come with a swap-able helmet free Reinhardt head. You could argue they might do this in a future release, for a different skin. You could argue that in game Rein always has his helmet on with this skin. I would argue that Hasbro will be very lucky if the line lasts long enough to release all 6 tanks (Rein, Orisa, Roadhouse, D.Va, Winston and Hammond), much less alternate skins of the tanks. Even if they did release another Rein with an unmasked head, I doubt a lot of people would want or need a second huge Rein figure and they certainly aren’t going to drop $50 just for the head. Basically, I doubt there is ever a chance to put out an unhelmeted Rein head, and not getting one now kind of sucks as a result.

Other than the head thing, he really is a good figure. I do feel like the $50 price tag feels a bit too high. He doesn’t really feel like 2x a single packed, smaller figure. He comes in a huge box, but a lot of the huge box exists to accommodate his huge shield. I would say he is still worth picking up for Reinhardt fans and anyone wanting a tank to go with all the smaller figures.

Overwatch Ultimates – Sombra

May 8th, 2019

by Ramen Junkie.

No comments yet

I had a lot of worry about Hasbro’s announcement of an Overwatch line. While getting more affordable versions of these characters is a nice prospect, I was very worried they would seriously screw things up. So far, it does seem to be a bit of a hit and miss line, but the hits outnumber the misses, and the misses are pretty obvious from the start.

The initial wave of single packed figures consists of Lucio, Sombra, Reyes (Reaper) and Tracer. I already have the Figma Tracer, though the Hasbro one looked a lot better in person than previous photos. Reyes still looks kind of funky and I have Reaper. So I opted for Lucio and Sombra. Both are in my top Five played heroes (Along with Tracer, Mei and D.Va) and neither have Figma figures coming yet. I wanted to start off with Sombra, who actually is my most played hero in the game.

So, right off, she looks way better in person than photos suggest. One thing I have noticed in photos is there is a weird graininess texture to her that shows up that isn’t really visible on the figure itself. The colors overall look really great and the head sculpt and paint are both really nice. There are a few places she could use a bit more paint but hey, Hasbro price point. Mostly her hand details could use a quick hit of coloring. I may add that later myself.

Articulation wise, she is, alright. It’s pretty much what you would expect from any Marvel Legends female figure. Her hips are severely limited by the long coat. The coat collar also feels a smidge too tall, since it sort of hinders her head side to side. Also in traditional Hasbro BS fashion, she only has single jointed elbows. Because Hasbro pretty much never gives female figs double elbows. On a side note, the coat looks like it might be removable, with little rubber pegs the way a lot of Hasbro’s coats are, but I am not going to test that theory myself and end up ruining the coat. She looks like she is just wearing a black body suit under anyway.

She also has weird feet. Not weird as in non functional, just weird. Her ankles are pretty wide and the feet themselves seem to be some of those rubber toe shoes, and not regular shoes. I honestly have not really looked at Sombra’s feet enough to tell you if this is accurate.

For accessories she has an extra set of hands, a Translocator pod, her Uzi, and a hacking effect that can attach to one of the hands. The accessories are all pretty nice, though the hacking effect is a little cheezy looking. It’s all solid pink plastic and it’s a little short. It’s wholey understandable in it’s design though, since Hasbro probably has a lot of breakage safety rules it has to follow for it’s figures. Anything less and it would break too easily. The effect from the Sombra Nendoroid is really nice, but I also worry that I am going to snap it to pieces anytime I look at it.

Overall, Sombra is pretty great. She has a lot of expected limitations, but she is a lot more affordable than an import figure. The whole lime scales really well with the Figma line as well, so having the Hasbro line as a supplement works really well.

Figma – Reaper

May 1st, 2019

by Ramen Junkie.

1 comment

I have to admit, I am super behind in talking about these various Overwatch figures, and a lot of figures in general. There’s various factors, but mostly I just, haven’t done it. Instead of catching up on Genji and Widowmaker and various Nendoroids, I’m going to just jump ahead here with Figma Reaper.

Reaper is quite a different toy than the previous Overwatch Figmas. Tracer, Genji and Widowmaker are all considerably more mobile in their overall look and design. Reaper is quite a bit bulkier than the previously released characters. He also has a lot more greebley detail going on on his body. Genji has a fair amount of this but Widowmaker and Tracer are basically wearing body suits.

All of this detailing is nice and crisp. His spikes are pretty sharp, for example. His coat has some articulated segmented parts to it so it can be posed draping or more flowing. His design unfortunately doesn’t lend itself to much posing though. The coat does hinder his hips a bit and his belts and straps hinder things a bit more. His armored lower legs kind of get int he way of his feet articulation as well and his shoulders are kind of bulky as well. Reaper isn’t really a ninja though, so not being able to do a ton of super dynamic poses isn’t really a huge loss and he makes up for it with detail.

Probably the biggest issue with articulation involves his head. The head itself is fine, but the hood piece attaches to the body in the front and back. This limits how much you can have him look side to side a lot. With the hood attached, his face is obscured. Or, you can detach the hood, but it then will just rest on his head, and it will reveal the huge peg holes and pegs. I kind of wish the hood were simply attached to the head itself.

He also feels a little light on accessories, but I think part of this is because both Genji and Widowmaker were pretty good for accessories. I mean, count wise, it probably has just as many extra pieces, and I m not sure what else they could have given him side from maybe some wraith form legs, but that would have probably doubled the price. What he has are an assortment of hands, a transparent effect that can sort of be used for any of his abilities (Wraith form, teleport, or Death Blossom), his two shotguns and some effect parts for his shotguns.

Speaking of his shotguns. They look right, and good, but man, having a physical version of this character kind of makes it obvious how ridiculous his design is. Dual wielding these two HUGE guns is kind of silly looking.

Don’t misunderstand me here, this is a good representation overall of Reaper. It just sort of makes the design flaws of Reaper really obvious when you have a little 3D version of him on a table in front of you.

Nendoroid – Junkrat

Mar 13th, 2019

by Ramen Junkie.

No comments yet

I have, so far, picked up every one of the Overwatch Nendoroid figures released so far. They all have some ups and downs, but on the whole they are pretty good. Today, I want to talk a bit about Nendoroid Junkrat.

Of all of the figures released in this series so far, Junkrat is definitely one of the most unique. Honestly he seems fairly unique compared to all Nendos, not just the Overwatch releases. Maybe there is some vague hope that there might be some Tank characters released in this line after all, with how much Junkrat has going on that’s special. First off, he is a fair amount larger than the previous releases. I honestly never really realized it in game since Junkrat is always hunched over, but if you look at a pure size chart, he’s one of the taller characters in the game. His Nendo, even with its goofy short proportions, is taller than the previous releases.

Part of this comes from his huge head and hair. These are also a bit unique in design, though Sombra who came out at the same time shares the uniqueness. On the previous figures, generally the bangs of the hair are removable, and the face plates swap out underneath the hair. The face plates are pretty interchangeable, that is, you can easily put Tracer’s face on Mercy, if you want. Junkrat’s entire front half of his head makes up his face plates, instead of just the bottom half like other Nendoroids. The hair bits also have to be removed and reattached in chunks, to make the swap. It’s a little clunky to do quickly, but the end result looks better. with his partially bald head, a plate styled like other Nendos would have left a visible seam across his forehead.

Speaking of the face plates, he also has a swapable mouth piece to give him a “tongue hanging out” look. As a side note, the eyes and mouth on the second head LOOK like they could be removable/swapable, but I didn’t really want to test the limits of the plastic and couldn’t get mine to come out. There isn’t really any noticeable difference in the base face anyway, so swapping the eyes around wouldn’t really do anything useful.

Additionally, he has his peg leg. This is also fairly unique to Junkrat. Between the peg leg and his huge head unfortunately, it also means he’s not going to be standing without a stand anytime ever. Though most Nendos have small enough feet that you’re going to have a hard time getting them to stand up independently anyway.

All these unique bits though help give him a lot of neat character to his design. He definitely comes off as “Junkrat,” goofy and crazy looking.

He doesn’t stop at his basic design though. He has a slew of really neat accessories. All of the weapons he wields in the game are represented here, he has his sticky bomb, his grenade launcher, his trap, and his Rip-Tire. The launcher and sticky bomb are fairly boring, the sticky bomb isn’t even painted, but the trap and tire are both great.

The trap can be laid out open or closed, and had a hand designed to hold it up to emulate his in game emote where he uses it like a puppet. The Tire is nicely detailed and can be mounted to his back, or to a extra articulated arm piece as if it’s being launched and rolling away.

You can add in on top of this that MSRP for Junkrat isn’t more than the previous releases, it makes him feel like a pretty good bang for your buck figure. All in all, I think he’s definitely one of the cooler Overwatch Nendoroids so far.