Reviews

Review – Marvel Legends – Gladiator Hulk Wave – Loki

Apparently, in order to get a proper figure, the Loki had to turn into the Hero. Ok, I have not seen Ragnarok, but it sort of feels like Loki was working with his brother again in a few spots int he Trailer. Maybe I’m completely misreading it. Also, that low blow probably isn’t warranted since Hasbro has been pushing out a lot more figures of MCU villains lately. We get Hela in this very wave, Vulture was a pretty cool Build A Figure, and even Ego got a figure. Maybe the voice of the people is finally being heard, maybe they will go back and pick up Trevor or Ronin.

Anyway, there was a figure released years ago for Avengers of Loki but it was kind of mediocre and the likeness wasn’t super good. Thor Ragnarok is getting pretty good treatment for a movie line, a few new Thors, Hela, Valyrie, the new Gladiator Thor, and of course Loki. He definitely has a better likeness from the previous Loki, Hasbro is doing something new with it’s movie lines because all of the heads are looking really good lately, with a good resemblance to the actors. He’s not wearing his older gold armor anymore, so he’s not necessarily a great straight replacement for Avengers Loki, depending on what you want from an MCU Loki. The new armor is still pretty decent and matches his new look for the new movie.

It’s not perfect though. His cape is really funky. A lot of the capes in Marvel Legends are kind of meh, but they tend to at least stay attached. Traditionally there’s a peg hole in the figure’s back and a post on the cape, and you just stick the cape on. Often there are little shoulder bits that curl around and provide at least a little bit of friction based hold to keep the cape attached. Loki does something new. Instead his cape has a pair of pegs on the shoulder bits. In theory this actually kind of makes things look cleaner.

Except the pegs are a pain in the ass to get into the peg holes and don’t stay in the holes very well at all. This isn’t helped by his hair getting in the way at every opportunity. So the cape at best kind of looks off because it isn’t pegged in properly.

The other problem with poor Loki is that he has no accessories apart from his crown. A couple of knives, maybe his staff, even though he doesn’t have it anymore, some sort of weapon would have been nice. Especially since every other figure in this wave got something. Things have been getting better on the accessories front with Marvel Legends, which is why it’s so disappointing that Loki has nothing.

Loki, as a basic figure isn’t a bad figure, he looks good, the sculpt is there and the paint is there and he is a character desperately in need of an update, but he ends up catching a couple of the traps that Marvel Legends have been plagued with on the way.

Review – Transformers – RiD – Scorponok

Sep 28th, 2017

by Ramen Junkie.

No comments yet

Possibly the last of these fun little animal Decepticons we’re going to see is Scorponok. There’s also a Toys R Us purple colored repaint of this figure called Paralon, who actually really resembles Beast Wars Scoponok, but this review primarily covers the normal brown colored mass released version. Scorponok’s animal motif is, a scorpion.

In fact, he simply IS a scorpion in his alt mode. While the other Decepticons all turn into vehicles with animal like themes in robot and beast mode, Scorponok just turns into robot and a scorpion. Straight out Beast Wars style. He has a really unique style going for him as well, and a very unique Transformation. The scorpion mode gives him some really obvious choices for hands, but Scorponok eschews that with a clever trick.

His scorpion claws slide up his arms to become a pair of huge shoulder pauldrons. No parts forming here, but they are essentially lose pieces at one point. The effect is neat for sure, but the connections tend to be a little lose on the shoulder joint. Given their large size they catch anything passing by and easily leverage out of their joint to become crooked or loose. The end result also means his claws have no real joints in Scorpion mode, which is kind of a lame trade off since Scorpion claws are one of the more versatile and fun joints in scorpion toys. Who doesn’t live a big set of vicious working pincers?

He also has a ton of fun character in his face and overall design. His little face with it’s little robot mustache makes him look pretty interesting. He also has a set of spindly legs that work well despite their small size and his upper body girth. He also completed his sandy sort of Persian motif with a scimitar weapon. The sword can be held in robot and scorpion mode as a giant stinger.

Overall, Scorponok isn’t the coolest Decepticon in the line, but he’s still a fun little toy. He does feel a little small overall, which is probably his biggest downside. The Paralon repaint kind of fits the name Scorponok a bit better, if you are looking at getting only one, but I find the brown color scheme works better for the figure overall.

Nendoroid – Tracer

Sep 27th, 2017

by Ramen Junkie.

1 comment

Good Smile Company makes two lines, primarily, Figma, and Nendoroid. Both likes primarily deal with anime and video game characters. Figma is more of a traditional style scale figure, they are generally around 1/12th scale. Nendoroids are all “Super Deformed” Chibi designs. Bigs heads and small bodies, sort of similar in style to something like Pop Vinyls in the US, except a zillion times better with articulation and interchangeable parts.

I’m not super big on the style, and there are a lot more anime characters I don’t care about int he Nendo line than the Figma line. That said, the first official figure from Overwatch was Nendoroid Tracer. I like Overwatch, I play Tracer more than any character, seemed like a good figure to test out the waters on the Nendoroid line. There’s a Figma Tracer being released later this year and Nendoroid versions of Mei and Mercy are coming up as well.

I had my doubts going into this line. A lot of those worries were pushed away upon actually getting the figure. She’s pretty awesome. I can fully admit, that this style of figure isn’t going to be for everyone, but this little Tracer is pretty adorable and a lot more versatile for poses and action that I expected her to be. Not every Nendoroid has as many joints as Tracer, only some characters get elbows, many just get swapable arms. She also pretty much requires the stand due to the size of her head, but it’s low profile and with some work she can be posed without it.

I was also worried that she was going to be smaller than she actually is. She isn’t huge, but she fits in pretty well with some smaller Figma and Figuarts figures. Really, given her style and related silly factor, she kind of works alright with some larger figures as well. She would definitely fit with other Nendos since they are all roughly the same size. She isn’t meant to be a perfect scale representation of Tracer, but she does a pretty good job of being a silly super deformed version. She has all of the most noteworthy details like her chest piece, glasses and arm fins. The center bit of her hair is articulated as well, so it can be adjusted a bit or to recreate her “blowing her hair” bit she does in the game.

For acessories she includes her stand, 3 faces, and several sets of hands. She also includes a pulse bomb, and her two pistols. The hands are made for gripping her pistols, open palms for throwing the pulse bomb or pegging the pistols on for her spin pose, and a set of closed fists. There isn’t anyway for her to hold the pulse bomb sadly, though in game she pretty much just tosses it out and runs anyway.

She also includes a little blue plastic piece that can attach tot he stand to represent when she Blinks. The end effect works pretty well at showing off her overall gimmick of speed and time shifting. I kind of wish there was a second piece of the Recall Glow but I’m happy with what she came with.

Overall, I really like Nendoroid Tracer. I’m looking forward to the upcoming Mei to go with her. The style definitely won’t be to everyone’s taste and she is probably a little pricey for her size, but she is fun to pose and mess with and is a neat representation of the popular character.

Review – Transformers – Combiner Wars – Computron (Technobot Giftset)

Sep 14th, 2017

by Ramen Junkie.

No comments yet

Combiner Wars was definitely an interesting take on the line. The need for every figure to be a robot and a vehicle and an arm or a leg really made for some pretty similar designs across the board. All of the most well known combiners, Superion, Menasor, Bruticus, Defensor, ended up with a release in the main line. Devastator got a massive Titan Class boxed set release as well. One vehicle combiner missing from the mainline was Computron. Instead of individual releases, Computron came available at the tail end of the line as a boxed set only, though he consists of repaints of previously released figures.

The boxed set for Computron consists of 7 figures, 5 forming the core combiner and one Legends class partner, like all of the other releases, who happens to also include another even smaller partner toy of it’s own. Unlike the other 4 known combiners, Computron is a straight update of his normal 5 members, no stand ins like Rook of Alpha Bravo. It’s also worth noting that there was also a Japanese boxed set released around the same time that costs around the same price. There are a lot of different design choices in which molds are used and both sets contain unique new remold versions of Strafe. I do not own the Japanese version but there are pluses and minuses to each design choice and a lot of what it comes down to is a preference of G1 cartoon vs G1 toy aesthetics.

Lightspeed

I want to start with Lightspeed since he’s probably the most boring of all of the figures in this set. Not really so much because of his design, but because he’s a repaint of the Streetwise/Prowl mold which is itself a remold of the Breakdown/Wildrider mold. Basically, this mold has been used a ton throughout this entire line and so it’s starting to feel a little tired. On the plus side, it’s one of the better molds in the line. He has a nice range of pose ability, his transformation is a little more interesting all around and it works well as both an arm and a leg.

The overall shape fits pretty well as an update to G1 Lightspeed as well. The original toy was a bit more orange in color however. This color works pretty well though and homages closer to the cartoon color pallet.

Nosecone

Next up we have Nosecone. Probably the weakest figure in the entire set, primarily due to the choice in base mold. The original Nosecone was a drill tank thing. Rather than take the Takara route of extensively remolding Rook, Hasbro’s Nosecone is simply a repaint of Brawl from the Combaticon set with a new drill bit turret.

A lot of Nosecones flaws are simply due to using the Brawl mold, which is the weakest in the line. He is so close to being pretty good though, at least in robot mode. The waist joint however is very poorly designed, things accordion together to connect the legs to the torso, but the accordion action isn’t quite a solid as it wants to be or should be. He does have a pretty nice paint job in robot mode as well which helps. The paint apps are more designed to homage the original toy than the original cartoon.

Where things fall apart is the vehicle. The intended design is to position the turret out what is the back of the original tank. The problem is this means the bottom of the feel are really obviously exposed in all of their hollow glory. You’re better off just positioning the drill facing forward the way Brawn’s turret sits and calling it a day. It’s mildly less accurate but looks a heck of a lot better.

Strafe

Strafe is kind of the polar opposite of Nosecone and Lightspeed. Where both of those were straight repaints, Strafe is an extensive remold of the Air Raid mold. Where Air Raid turns into an F-14 fighter jet, Strafe has an entirely new front half and a completely different wing assembly on the legs. The only real noticeable bits that are the same are the robot parts and the rear tail fins. As such he shares the same basic transformation that all of the Aerialbots used with the clam-shell leg mechanism and the arms folded to the sides and the nosecone backpack. All of the Aerialbots are solid figures however, which translates into a nice plus for Strafe.

Unlike his Aerialbot counterparts, Strafe’s “funky space ship” alt mode allows him to wear his bulky undercarriage much more well. He isn’t trying to be a sleek jet, so the body bulk and complete lack of aerodynamics become much more excusable.

Afterburner

Afterburner is the pseudo new mold of this set. The motorcycle mold in Combiner Wars showed up originally in Takara’s Defensor set for Groove. There has been rumor and speculation that the US release received Rook in place of Groove because of safety issues involving the clear plastic canopy, due to scale issues of the motorcycle, and possibly just because the mold is a little large for a standard deluxe and this didn’t fit price wise. Eventually Groove did get a limited release in the states through several online retailers. Afterburner however is the most reliable way to get the mold in the US, though Afterburner is also a remold and not just a straight repaint of Groove.

I can see why he might have failed standard safety tests, that window backpack just sort of hangs off of the top of the figure and clear plastic tends to be more brittle than the standard plastic used in most figures. On the other hand, here we are, with a regular mass release version of the mold. The speculation that he’s too large is feasible as well, he is definitely taller and bulkier than most of the Combiner Wars deluxes. The scale issue, at least in Afterburner’s case, kind of falls away however. Groove is a police motorcycle, thus would be much smaller than his fellow Protectobots. Afterburner is a space motorcycle. Who says he isn’t a giant space motorcycle. Especially when all of his friends are giant robots.

Scattorshot

Scattorshot is a repaint of the much more muted color pallet, mass released, Scattorshot who is a remold of the Aerialbot torso, Silverbolt. The mass release version of the figure was very bland and mostly red, and formed the torso for “Beta-tron”. I’m not sure why he ended up with two releases, my only real assumption is they weren’t sure Computron would actually get a release. The boxed set version has a lot more white spots of color and different shades of red, which really helps make the mold look a lot less… beta, in design.

This mold is one of the better torsos in the line, but the individual robot is a little funky looking with it’s huge boots. It does work for Scattorshot though, the original toy also had some kind of funky proportions going on with his body. The funky space wings really help to make him seem different than Silverbolt as well, which is nice.

The vehicle gets a new node piece in the form of a giant cannon, in addition to the previously mentioned space wings. There are enough little greebly bits added to the vehicle to help him stand out even more from Silverbolt. The torso, doesn’t fare quite as well however, as it very much resembles Superion’s torso.

Scrounge and Cybaxx (Boltax)

Because there were little “helper” transformers in the Legends scale for each of the other combiners, Computron also includes a repaint of Generations Cosmos and Payload in the form of Scrounge and Boltax. Both are relatively obscure G1 comic characters, both of which were originally yellow gold colored. The original Scrounge seems to turn into some sort of wheel thing, so Cosmos’ flying saucer works pretty well there. Boltax doesn’t really have an original alt mode, his association here is more on the “smart guy” side of the Technobots theme. He was sort of an omniscient librarian in his original form.

The new head on the Cosmos mold is a nice little touch, it would have been really simple and easy to just make him a repaint. Given that this is an older mold from an older line, the interactivity with the larger Computron is pretty weak. Where Menasor and Defensor got new chest pieces and Superion and Bruticus got guns, Scrounge sort of becomes a shield that loose bolts onto existing pegs and Boltax turns into an undersized targetmaster style gun (just like Payload). Well, undersized for Computron, less so for any of the individual robots.

Computron

So, being apart of Combiner Wars, and the combiner Computron, these figures all merge together to form one giant robot. He’s actually got quite a bit going for him in his combined form, compared to the other combiners in the line. Despite some of the individual flaws, all of these figures are good limbs. Couple this with the Silverbolt/Scattorshot torso and you end up with a pretty solid combined robot.

What also helps make this set is that he also includes a new set of hand/foot pieces. The individual releases all came with various hand/foot bits that could be either a hand or a foot. They were also a bit undersized for the combined robots, especially for the feet. Computron here has two dedicated feet that are much larger than the previous hand/foot gun pieces, and two nicely sculpted left and right fists. The Hand/Foot Guns all were also designed to work as a left or right hand. These pieces really help him look more beefy and properly proportioned in his combined form.

His color scheme is a little hodge podgey, though the tones are all sort of in the same general pallet and there is a lot of colors across the limbs that helps everything feel a bit more blended. He also benefits from the boxed set benefit of budget, because he has a bit more paint apps across the board, which helps make him look really nice.

Overall, Computron is a really great complete package of a combiner. He’s probably my favorite of the 5 combiner sets that I own (Superion, Bruticus, Defensor, Menasor, and Computron). The techno spacey Cybertronian theme of all of the vehicles helps these guys stand out in a sea of Earth modes and help hide some of the bulky-ness flaws of the Combiner Wars line. You also get an entire set instead of having to hunt down individual robots, which makes things a lot easier.

Review – Transformers – RiD – Bisk

Sep 7th, 2017

by Ramen Junkie.

No comments yet

I have yet to actually watch any of the Transformers Robots in Disguise show, but very early on one of the designs showed off was for a character named Bisk. Everyone hoped Bisk would get a toy but early indicators where we had one Decepticon for a dozen Autobots, it didn’t seem likely. Thankfully things changed and we ended up with our crazy Lobster Man Transformer. He’s even gotten a repaint named Thermidor.

Bisk, has the pleasure of having a Lobster for his animal theme. He definitely takes this theme above and beyond with his lobster head and giant Lobster Claw hands. Even his vehicle mode kibble hanging off of his back works since it sort of looks like a lobster shell. I can fully understand how this zany looking robot would not work for some people, he certainly stands out with other Transformers, especially non RiD Decepticons, but he certainly has a ton of character from this look.

This character even goes a bit deeper than expected with his Vehicle Mode. Transformers Robots In Disguise is a sort of sequel to the previous series, Transformers Prime. It shares a general design ascetic and the plot is a sort of follow up to the previous series, though the tone of these two shows is quite different. Bisk’s vehicle very much resembles the Vehicon Drones that were ever present in Transformers Prime. He’s not an exact match but the overall shape is there. His guns even mount on the front headlights the way the old Vehicon guns do.

His guns also work in robot mode via the same pegs, mounting on top of his lobster claws. The claws are particularly interesting, the arm joints aren’t quite traditional joints for up and down and rotation, but there are essentially two different elbow joins next to each other, which allows for his claws to work both in a vertical and horizontal orientation. It really helps add to the range of poses he can make using his big ol’ claws.

Overall, though the aesthetic won’t work for everyone, Bisk is a pretty fantastic addition to the Robots in Disguise line up. He looks nice in both modes, the Transformation is pretty straight forward and he just oozes character. He’s nicely poseable too, which is always a good feature.