Reviews

Review – Transformers – Masterpiece Sunstreaker (MP-39)

I don’t really collect Masterpiece Transformers, not on any sort of large scale. I have a few, the original MP-01 and MP-05 Optimus and Megatron. Though both of those are in the old larger scale of Transformers. I use MP-08 Grimlock as my “Classics Grimlock”, because it’s a nice looking toy and his bulk makes him nice and imposing next to mainline sized toys. Sunstreaker is more of a personal indulgence. When he was announced, he looked really nice, and when a reissue of his brother Sideswipe was announced to go with him, I definitely wanted the pair.

So, I just want to cut to the chase a bit on this guy, this is a really damn nice Transformer. He looked fantastic in the promotional photos and he lives up to that in every way. The robot mode is very slick, very poseable, and very solid. The whole transformation does an excellent job of collapsing everything together and removing any dangling vehicle kibble. The result is a very nice representation of Sunstreaker as he appears on the show.

The Transformation may actually be the downside of this figure, if you aren’t really into complex transformations, it’s definitely a plus if you are, There are a ridiculous number of little flippy and sliding parts that all come apart and come together to make this robot. Everything about his backpack has to collapse together just right to make it all conform into the proper shape. The front windshield of the car is supposed to fold up into the backpack but it pops off easily and honestly, I prefer to just pull it off and put it aside because I worry that its going to break while putting the backpack together.

There is so much more about this figure that makes it exceptional though, even by Masterpiece Transformer levels. There are extra joints in his shoulders, that allow him to hold his gun with two hands. The vehicle itself has some nice surprises as well. Despite already being a complex puzzle of joints and panels to build the robot, the vehicle goes even farther and is able to convert between a standard stock Lamborghini Countach, and the tricked out super car that Sideswipe was on the show. This is more than just a panel flip on the back, it’s a panel flip, and some roll over parts and even a second set of taillights that flip up over the stock tail lights.

He’s also loaded with fun accessories. Aside from a pair of guns, he also includes a small Chip Chase figure in his wheelchair, several alternative face plates, and an alien mask from Hoist Goes to Hollywood. I don’t know if it’s a widespread issue, but I did have a problem with his smaller gun. The clip holding it together pretty much broke immediately. It still holds itself together as a gun, but it doesn’t transform anymore.

Overall, Masterpiece Sunstreaker is just a really fantastic transformer. He’s not even a particularly big name character in G1, so it’s not real clear why he deserved such a great treatment.

DX-9 K1 Freeman (Overwatch Bastion)

Dec 5th, 2018

by Ramen Junkie.

No comments yet

So, even before Goodsmile announced they were doing Overwatch figures of any kind, a company known for 3rd party Transformers, DX-9 put out a transforming 3rd Party Bastion. Or as it’s officially know, K1 Freeman. So, a little background, “3rd Party” is a term used often in the Transformers community to refer to a slew of toys and companies that produce unofficial, unlicensed Transformers figures. There are, I believe, similar operations in other toylines, but Transformers is definitely the biggest market for these toys. They aren’t straight bootlegs, like you might find at a flee market, where some company produces a replica of of an official toy and sells it for cheap. These are heavily engineered and often expensive figures, released without the official sanction of the company holding the IP. They also often get goofy names like “K1 Freeman”. Bastion, being sort of a Transformer, got the 3rd Party treatment.

I waited on picking this one up for a while, until the official Figma figures were announced. I seriously doubt Figma ever puts out any of the larger characters, though I’d be happy to be wrong. I have even less faith that Figma will ever put out a transforming Bastion. So Freeman is the next best thing. The main thing that feels off about him is the default skin, which I had honestly forgot what it even looked like, because no one uses it in game.

He does the job pretty dang well. There is some limitation on the articulation, especially on the gun arm, but it’s mostly pretty good. Bastion isn’t exactly a ninja or anything, he’s a big heavy military robot that turns into a tank. Being the product of a 3rd Party Transformers company, he also has all three of Bastion’s modes. Granted, none of Bastion’s transformations are particularly complex. For the turret, he pretty much drops to his knees, fold up the arms, and extend the barrel on the back.

The tank involves some parts swapping, though there isn’t really any other way to handle those giant treads. The Gatling turret swaps for a tank barrel and the legs slide off and get replaced by the tank treads. The treads are actually functional, which is cool, but rubber on toys tends to not really last, so I imagine over time, they will likely end up falling apart. The parts forming kind of sucks, but it’s slick and easy so it works.

The best part, Freeman scales very nicely with the official Figma characters. He might be a tad oversized, but it works, and it’s not a lot if he is. He also includes a little version of Ganymede, his little parrot friend. Ganymede has a little peg that lets him peg onto a fee places on the figure.

Overall, Freeman is a pretty nice representation of Bastion. He’s gotten pretty affordable on eBay as well. The whole thing is very solidly built and has some nice heft to it as well, nothing flimsy here. The real X factor is what Hasbro does with it’s recently announced Overwatch line. They are more likely to release Bastion than Figma, but who knows if it will transform at all. I suspect it would at best turn into a turret and not a tank.

Review – Marvel Legends – First Ten Years – Thor the Dark World (Thor and Lady Sif)

Dec 3rd, 2018

by Ramen Junkie.

1 comment

For the ten year anniversary of the Marvel Cinematic Universe, Hasbro is putting out a special sub line of Marvel Legends celebrating the event. These figures all come in special boxes that create a little mural when combined along the edges, and all are themed around different movies from the MCU so far. Its sort of the Marvel Legends equivalent to the Transformers Studio Series line. They are also using it as a chance to catch up on characters who may have been missed over the years in the previous lines. This particular set is for the second Thor movie, Thor: The Dark World. In case you forgot which one that was, since its often thought of as one of if not the worst movies in the MCU so far, its the one where Thor has to rescue Natalie Portman from an infection of Aether, and stop the evil Dark Elf Malekith from using it to destroy the Nine Realms.

This set includes Thor and Lady Sif. I’m going to start with Thor, since he’s kind of the boring figure of the set. We’ve gotten several Thor figures over the years, and several releases of this particular Thor, more or less before. It’s not a bad figure really, and the beefed up paint jobs that the Ten Years line is getting really help bring out the niceness of the sculpt versus the previous releases.

The main weaknesses aren’t anything new. The long plastic cape kind of hinder a lot of more dynamic poses and the long hair is a little thick and weird looking. It’s probably the nicest version of this early style Thor we’re ever going to get in Marvel Legends though, so it’s not a complete loss or anything. His only accessory is his hammer.

Moving on, there’s Lady Sif. Lady Sif is a character whom a lot of fans have been wanting a figure of for a while. She was fairly prominent in the first two Thor films and has appeared in a couple of episodes of Agents of SHIELD as one of the few connecting threads between the TV and Movie world. She never showed up in Ragnarok so she wasn’t wiped out by Hela. It’s possible she could even return for Avengers 4 I suppose.

In the MCU, Sif is just sort of, one of Thor’s friends. In the comics, she is sometimes his girlfriend. In Norse Mythology, Sif is the wife of Thor. The fact that she hasn’t been included in previous lines is kind of a good thing really, she’s being released now, while Hasbro is at a nice peak for paint and sculpt. Also, it’s not like the first two Thor Movies really had dedicated waves. Almost all of the MCU films have gotten some sort of pretty dedicated wave except the Thor films. Thor pretty much just gets figures for Avengers films.

The sculpt on this figure is pretty great too. The head looks like Jamie Alexander. The armor and weapons is full of neat little etching and detailing. The paint work is is very nice as well. Like I said, it’s kind of a plus that she is just now getting a figure. She also has a ton of accessories. She has her little shield, and three swords. Two of the swords are identical, one of the two can peg into the larger one and create a larger javelin sort of weapon. I do have a bit of a nit picky complaint on the swords. There is nowhere to store the swords on her person. There aren’t even any loose belts to let you fake it by wedging the sword under the belt.

Is the two pack worth it? I suppose it depends on some things. How much do you want a Lady Sif? How many versions of the old Thor design do you already have? It’s been discounted down already so getting it cheaper than the usual 2 pack price isn’t too hard. It’s a nice set, but it’s mostly the Lady Sif figure.

Transformers – Studio Series – Jazz

Nov 29th, 2018

by Ramen Junkie.

1 comment

Studio Series is a line that I wish I were more excited about. I just really don’t have a need or interest in updated versions of most of the Movie Transformers. I had heard a lot of good things about Jazz, and the only other version of Jazz was the one from the first movie, which wasn’t a bad toy but not super great. After finding him on sale, I decided to go ahead and pick him up, though I was a little worried about his size.

The size of this figure is definitely the most noticeable thing. Jazz is one tiny toy. Part of this stems from the push for robot mode scale that I mentioned in the Studio Series Blackout review. He sort of feels like a not so great value next to other figures, especially with the price bump. He includes a pretty large weapon, but it doesn’t really make up for the lack of plastic. Granted, there’s more to a transformer than how much material it’s made of. Jazz makes up for his lack of size a bit with his very nice looking shinny paint job. He also has a pretty neat transformation.

His robot mode is small, his car mode feels absolutely tiny. It helps a bit that the Pontiac Solstice he is based on is a fairly small car, but it is barely larger than a basic scaled Transform. Even as a small car, it looks out of place next to other deluxe sized Transformers, including previous Movie based characters. It looks really nice at least. On a related note as well, getting things to all mesh together can be a little tricky, there is a peg on the underside of the roof that needs to be pegged in first before almost any other step. Going back to robot mode has a few little quirks, the head is a pain to pull up out of it’s little hole. I do really like how the chest transforms however, the way the whole thing rolls over and clips upside down is really neat and not something that has been done in Transformers that I recall. The front of the car also pops out to flip over which works to really make the chest look similar but different than the front of the car. It’s a nice little touch.

There is also this really need trick with his gun. It’s not as original of an idea as the chest, but the gun can be held by a standard 5mm peg fist, or the fist can be folded in and the gun attached to the end of his arm. It replicates the way the guns in the movies would sort of transform out of the robot arm. The clip isn’t super strong though, so it tends to fall off if bumped the wrong direction. It’s also nice to have a movie Jazz with real arms, and not the weird hollow arms the original had.

Overall, despite the size problem, Studio Series Jazz is a pretty nice figure. He’s visually interesting in both modes, partly from his nice coat of paint. The transformation does some neat tricks. The robot is pretty nicely pose able, he has some really good ankle tilt joints that aren’t even part of the transformation. He’s definitely a good update for the old Jazz and pretty nice on his own.

Figma – Tracer

Nov 28th, 2018

by Ramen Junkie.

No comments yet

I have this incredible love/hate relationship with Overwatch. I do enjoy the game and the characters, but I kind of hate a lot of aspects of the game play. There are a lot of annoying balance issues going on right now. I also feel like the lack of community servers still really hurts the game and the ability to get over a lot of it’s flaws by at least playing with fun people regularly. This isn’t really supposed to be a rant about Overwatch though, it’s about Figma Tracer.

Good Smile Company has two main lines and a bunch of other sub lines, they are producing Overwatch figures for the two primary lines, Nindoroid and Figma. Both lines offered Tracer as their initial offering, though so far the Nendoroid line is far outpacing the Figma line in terms of releases. Where Nendoroid Tracer is a stylized Chibi version of the face of Overwatch, the Figma is much closer to the likeness you’d see in game.

Unfortunately it’s not a perfect likeness. The worst offense on this toy is the face. It’s just… off… all over. It’s almost like it’s a sort of bizarre bishoujo version of Tracer. There is definitely too much “anime” in the sculpt. I mean, Overwatch is pretty heavily cartoon in it’s stylization, but it’s not manga styled. It’s kind of funny because the Nendoroid version almost looks more like Tracer in the face, despite the goofy proportions.

The Nendoroid also has some accessories that the larger version really should have included as well, even if they were straight up the same pieces. Aside from the obvious blink streak included with the Nendo, the Nendo also has the little flippy hair piece on it’s head, which was a nice little fun touch. The pegs on the stands aren’t the same size at all, so there isn’t even a way to use the blink effect piece with the Figma. Also notable, is that the guns are not the same between the two figures, though they are pretty close to being the same size. Aside from the guns, Tracer includes some alternate faces and a decent selection of hands and her pulse bomb.

I also have a bit of an issue with the poseability of the figure. It’s pretty good, except for the hips, which are extremely limited by the design and the belt straps. I’m not sure what could have been changed but the knees also don’t bend as far as they could. Basically, a little more bend all around in the legs could have really helped Tracer pull off some of her signature poses better. The “real” straps are nice, but I can’t help but think sculpted straps might have allowed a bit more range of motion.

Tracer is decent, overall, though I honestly think I like the Nendoroid more. At the moment it’s the best Tracer figure available, but Hasbro has recently announced a new line of Overwatch based figures coming, and you can bet it will include Tracer. Figma Tracer isn’t a bad figure, but it could have been better without that totally off face sculpt.